Its all about managing the customers expectations, minimizing disappointment, complaints, returns & of course cost.
The ARA (Automotive Recyclers Association) coding system is the worlds standard for describing the condition of used autoparts. It gives customers a much clearer understanding of the condition of used parts when buying at a distance (over the phone or on the internet).
Its been widely used... in the USA for many years & is gaining increasing traction in the UK.
For more information visit the MVDA website
http://www.mvda.org.uk/PartsStandards.aspx
MVDA
Saturday, 2 April 2016
Friday, 1 April 2016
SCRAPPERS - BACK IN THE YARD - SERIES 2
Don't forget - the highlight of everyone's week - the next episode of Scrappers is on Tuesday BBC2 22:00hrs.
The series of 6 is now searing its culmination.
Amusing & Horrifying, but oh so familiar, all at the same time!http://www.bbc.co.uk/progammes/b0663ft6/episodes/player
CATALYTIC CONVERTER DECANNING – WE NEED YOUR HELP
We have been asked by the Environment Agency and Health & Safety Executive for help in making sure that suppliers & manufacturers of catalyst decanning equipment are aware of the problem with RCF in some cats & that they understand the dust abatement and abstraction requirements now necessary.
The EA & HSE have identified the following companies. If you are aware of any others can you please let us know ASAP (e-mail info@mvda.org.uk)
UK.
Vortex depollution (http://www.vortexdepollution.com/…/cat-proce…/cat-guillotine).
c/o JMC Recycling Systems Ltd
Unit 2, Harrimans Lane Dunkirk Nottingham NG7 2SD
Tel: +44 (0)115 940 9630
Email: sales@jmcrecycling.com
c/o JMC Recycling Systems Ltd
Unit 2, Harrimans Lane Dunkirk Nottingham NG7 2SD
Tel: +44 (0)115 940 9630
Email: sales@jmcrecycling.com
Crow Environmental Ltd
3 The Quadrangle Centre, The Drift, Nacton Road, Ipswich, Suffolk IP3 9QR
Telephone: + 44 (0) 1473 290267
E-mail: sales@crowenvironmental.co.uk
http://www.crowenvironmental.net/catalytic-convertor-de-can…
3 The Quadrangle Centre, The Drift, Nacton Road, Ipswich, Suffolk IP3 9QR
Telephone: + 44 (0) 1473 290267
E-mail: sales@crowenvironmental.co.uk
http://www.crowenvironmental.net/catalytic-convertor-de-can…
CHINA
Jiangyin Metallurgy Hydraulic Machinery Factoryhttp://www.yj-hydraulic.com/
Jiangyin Metallurgy Hydraulic Machinery Factoryhttp://www.yj-hydraulic.com/
ATTENTION SCOTTISH VEHICLE DISMANTLERS !
The ‘Air Weapons and Licensing (Scotland) Act 2015 – Guidance on the provisions for Metal Dealers and Itinerant Metal Dealers’ was published on 16 March.
The guidance can be viewed HERE:...
MVDA AIRBAGS REPORT UPDATED
The 2013 ‘airbags report’ put together by MVDA & BVSF has now been updated to take account of the legal changes that came into effect in August last year, and supporting technical information provided by other associated trade bodies.
To see a copy of the document & contribute your views/ comments, MVDA members should contact the office & we will e-mail you a pdf version.
Not an MVDA member?
Want to make your voice heard & work with other like-minded businesses?
MVDA welcomes applications from all professional vehicle dismantlers, irrespective of size.
VEHICLE DISMANTLERS COMING UNDER SCRUTINY FOR HEALTH & SAFETY?
Earlier this year we were contacted by the HSE with a general query about H&S at vehicle dismantling yards. They said that they had identified these premises as a potential area for attention in 2016 & 2017. They did not disclose the reasons for this.
Separately we were also contacted by Environmental Health departments at a number of local Councils with queries about dismantling yards. These seem to be general... queries, because they don’t understand how the industry works or what is ‘best practice’ & so didn’t want to go onto site unprepared. This is similar to what we saw in 2014-5 with local authority & Police enforcing SMDA13.
As you know there has been a lot of attention about fires at waste sites. This may partly be the cause of these enquiries, but they appear to be unrelated to SMDA13.
We passed on to the councils the contact details for Phil Wass, as an independent H&S consultant with experience in this industry.
On Monday 21st March, MVDA attended as an observer a training session for Environmental Health Officers organised by Phil.
Phil gave a good presentation about how the industry works & what to expect. He ran through vehicle recovery, storage, depollution, crushing, FLTs, scrap handlers, vehicle movements, manual handling, TCM etc.
Sadly, council EHO attendees appeared not to have been liaising with their colleagues & Police responsible for enforcing SMDA13 or with the local EA.
MVDA members are advised that the HSE & local councils appear to be showing an increasing amount of interest in our industry & to make sure they’re prepared. We will let you know if we hear of anything in particular.
If you need H&S advice contact:
Phil Wass
WASS MANAGEMENT LIMITED
Phone - 01773 541441
Fax - 01773 541464
E-Mail - wassmanagement@aol.com
Mobile - 07970 166298http://wass-safety.co.uk/
WASS MANAGEMENT LIMITED
Phone - 01773 541441
Fax - 01773 541464
E-Mail - wassmanagement@aol.com
Mobile - 07970 166298http://wass-safety.co.uk/
SCRAP METAL FIRM IN COURT OVER SEVERE INJURIES TO WORKER DUE TO FORKLIFT TRUCK MISUSE
The Health & Safety Executive, HSE (www.hse.gov.uk) reports that a scrap metal firm and its director have been sentenced after a Manchester worker suffered severe injuries to his left arm when it became stuck in a forklift truck.
The worker, aged 30, from Levenshulme remained trapped for over two hours while the emergency services tried to free his arm from the vehicle’s mast at Levenshulme Trading Estate, Printworks Lane on 8 November 2013.
Ultimate Traders Ltd and company director Nasir Rashid were prosecuted by the HSE after it emerged he had been told to stand on the forks of the truck to help move scrap cars into the back of a shipping container.
Manchester Crown Court heard that Mr Rashid, aged 36 from Greenford in London, had been driving the forklift truck and that the scrap cars were due to be exported to Pakistan where the metal would be sold.
The worker suffered severe crush injuries when his arm became trapped and it took the combined effort of three fire crews, a specialist major rescue unit, two air ambulances, a medical team from Manchester Royal Infirmary and three ambulance crews to rescue him.
He sustained nerve damage to his left arm which makes it difficult for him to grip or lift items, and was in hospital for nearly two months. He still needs to visit Manchester Royal Infirmary for treatment and has been unable to return to work due to the extent of his injuries. The court was told the company failed to report the incident to HSE for nearly three months, despite being told on several occasions that this was a legal requirement.Speaking after the hearing, HSE Inspector Sarah Taylor said: “The worker remained trapped for over two hours while the emergency services battled to cut him free, but this incident could easily have been avoided.
“Ultimate Traders and Nasir Rashid had a legal responsibility to make sure the worker stayed safe, but instead he was instructed to climb onto the forks of a forklift truck to move scrap cars into a container. He suffered severe injuries as a result which will affect him for the rest of his life.
“Workers should never be allowed to stand directly on the forks on a forklift truck because of the risk of them falling or being injured by moving parts on the mast. This case should act as a warning to firms that they will find themselves in court if they do not take the safety of workers seriously.”
SCOTTISH MVDA MEMBERS: APPLY NOW FOR YOUR NEW METAL DEALERS LICENCE
MVDA members in Scotland are reminded that they should contact their local authority ASAP & apply for their metal dealer’s licence before 1st June 2016.
As with SMDA13 in England & Wales, vehicle dismantlers & salvage agents in Scotland will now fall into the definition of a ‘metal dealer’.
As with SMDA13 in England & Wales, vehicle dismantlers & salvage agents in Scotland will now fall into the definition of a ‘metal dealer’.
RCF MATTING IN CATALYTIC CONVERTERS
Further to our note to members last year, the Environment Agency is now reclassifying the handling of catalytic converters as high risk.MVDA has already sent members a detailed e-bulletin about this.
If you haven't seen it check your e-mail inbox, log into the LATEST NEWS section of the MVDA website or call the office (01543) 254 254.
FIREFIGHTERS TACKLE MAJOR BLAZE AT STOKE CAR BREAKER.
On 6th March the Stoke Sentinel reported that 22 firefighters had worked overnight to extinguish a major blaze at the car dismantler McGuinness & Sons, in Longport, Stoke-On-Trent.Emergency services had been called to the scene at around 5.40pm, where they found a number of vehicles alight and plumes of black smoke rising in the sky.
The blaze is believed to have been started deliberately.
Staffordshire Police ha...ve also been made aware of a possible connection between this fire & a second incident, which took place less than 20 minutes later in a disused factory behind the scrapyard, in Mill Vale Street.
A Staffordshire Fire and Rescue Service spokesman said: "A number of cars have been on fire and compressed air foam is now being used as water was ineffective. The metal was so hot, the water was just evaporating. The foam is now smothering it and the incident is under control.”
"We were also called out to another incident in the area at 6pm, when we received a call regarding a fire in a disused factory in Milvale Street. The police are aware of the incident."
You can find more details & images here:http://www.stokesentinel.co.uk/…/story-28869427-…/story.html
Subscribe to:
Posts (Atom)